Roman Dudek

Here is a template/preset for the 2017 model of the Samsung gear360 VR camera (the smaller sphere with handle, compared to the previous model of larger sphere without any handle). The preset now contains lens distortion correction and vignetting correction. SamsungGear360_M2017b.grp_.zip

Here are presets for Insta360Pro cameras, for two different camera resolution settings: 3200x2400 and 3840x2160 pixels. Be sure to center each camera and then use Improve Alignment to correct for different camera units. Insta360Pro.zip

Hi, Use this preset if your footage is 3840x2160 resolution instead of the usual 2880x2880 resolution. ZCamS1Pro_3840X2160.grp_.zip

Hi, When you create prest in PTGui, use the "full frame fisheye mode", otherwise MistikaVR will not read it correctly. We use import from PTGui routinely so we are quite sure it works. Regards, Roman

You can do it with PTGui. Also, we can do it for you if you send us 3 sample images or videos. Best regards, Roman

The preset bundled with the builds to the moment had a bug - it fixed the output resolution at 4kx2k, so renderring at any other resolution, the results were cropped/padded. Here is the correct preset. Be sure to center the lenses using the lens centering procedure. SamsungGear360.zip

For good results, be sure to go over the cameras, one by one, and center their fish-eye crop circle. Then, as usual, Match Colors and Improve Alignment. iZugar_Z3Xc.zip

For good results, be sure to go over the cameras, one by one, and center their fish-eye crop circle. This is a second version, taking into account different filming ratios: 16:9 and 4:3 ratio. Check what ratio your footage is and apply the right preset. GoProEntaniya220-1.zip

Center carefully both camera crop circles, it is very important for the stitch quality. Improve Alignment not always works specially if most of the top is cloudless sky. You could use the "Improve Alignment" on a shot with ceiling, like in middle of a hall, and then keep this preset for more difficult shots. However, the initial stitch tends to be quite good as there is plenty of overlap for the Optical Flow to work with. GoProX2Entaniya250_4-3ratio.zip

To optimize the preset for your rig unit: Use a calibration friendly scene: Nothing but floor nearer than 3 meters, better more. Be sure to calibrate the camera centers. Then apply the "Improve Alignment". Save the preset as optimized for your camera unit. ZCamS1Pro.zip

Hi Jang, Could you provide a sample video? Probably the preset from Kodak Pixpro will work, however we could confirm and create a separate preset for Pixpro 4k if it it differs.

Hi, Here is a standard preset for the iZugar Z4XL camera. Also, there is a specific preset for the Alvaro's sample that adjusts lens centers and camera orientations specific to his rig unit. Cheers, Roman iZugar_Z4XL.zip Alvaro_IZugar_Z4XL.zip

Hi Ruben, Here is apreset for your Kodak Pixpro. There is the generic Pixpro.grp preset: It sets the nominal orientations and parameters. There is a RubenPixpro.grp with optical centers tuned specificaly for your camera unit. If used with any other camera unit, use the generic Pixpro.grp and try to cet correctly the optical centers. We will add soon a tool for simpler optical centers adjustment. Tell us how did you do! Cheers, Roman KodakPixpro.tar

Hi Ruben, Could you provide a test footage from the camera so we could create a preset? Cheers, Roman