Jump to content

Rig Presets

  1. Hi everyone! Preset for KanDao QooCam 3 Ultra 8K camera is now available in Mistika VR! 😃🌟 Many thanks to Stefano Sburlati from Motion Pixel for providing Calibration sample. Presets for video and stills are available in this post. Friendly reminder: Make sure to login the Forums to download the presets. *If necessary, to adjust this generic preset to your unit, center manually the crop circles for both lens, then use "improve offsets" and "improve angles" tools. KanDaoQoocam3Ultra_3840x7680_Video.grp KanDaoQoocam3Ultra_6944x3472_Still.grp

  2. Started by stefano.sburlati@yahoo.it,

    Hi! Is there a preset for Qoocam 3 Ultra 8K? thanks for info Stefano

  3. Prest for Insta360 ONE RS 1-INCH 360 EDITION with Leica lens is now available. Applay the preset matching the resolution of your media. Calibration sample courtesy of Joby Catto. The preset is attached with the post, you need to login to be able to download it. To adjust this generic preset to your unit, center manually the crop circles for both lens, then use "improve offsets" and "improve angles" tools. Insta360OneRS1InchLeicaLens_2944x2880.grp Insta360OneRS1InchLeicaLens_3264x6528.grp Insta360OneRS1InchLeicaLens_6528x3264.grp

  4. Prest for KanDao QooCam 3 is now available. Calibration sample courtesy of Timm Westen. The preset is attached with the post, you need to login to be able to download it. To adjust this generic preset to your unit, center manually the crop circles for both lens, then use "improve offsets" and "improve angles" tools. KanDaoQooCam3_2880x2880.grp

  5. Started by Jay Harrison,

    Hey 🙂 Can anyone help me with a ZCam V1 2880x1524 60 fps preset? I have looked around but cant find one. Apparently this preset was released with 10.1. Jay

  6. To use the preset, import the clip twice, as if it were a stack of two cameras. (We will automate this in future to avoid this step). Chooze the 'Show one input" mode and switch on the overlay to center the crop circle for both cameras. It may help to rise temporarily the output camera gain to see the actual lens crop circle to guess easier the crop circle outline in darker scenes. Then, use the "Align mode" to balance the stereoscopy. Thanks to Eric Cheng and Hugh Hou for the media samples! CanonRFDualFisheye.grp

    • 0 replies
    • 1.9k views
  7. Hey there, we have some captured "cameras" from a realtime simulation from a fulldome setting (5 beamer, 5 computer). Unfortunately i get absolutely no reaction from Mistika from the imported Hugin or PTGui projects to the workarounds shown in these tutorials: "Seamless Stitching using PTGui and Mistika VR" and "Hugin Integration in Mistika VR" from your YouTube channel. Mistika 10.3.1 (Trial) Hugin 2020.0.0.2f576e5d5b4 PtGui Pro 12.7 (Trial!) Yes, i have seen this post: If i load any of the saved projects, Mistika is doing.... nothing at all. No stichting, no failure popup. Nothing. Any idea what i am doing wron…

    • 2 replies
    • 2.5k views
  8. A preset for the DJI Mavic 2 Zoom (25 stills panorama) now available. As the drone is not entirely precise while pointing in the 25 directions, every shot needs to be individually adjusted. To use the preset, -Drag the folder containing the 25 stills into MistikaVR Choose "Import files as individual images". -Apply the attached preset -Toggle the "proxy" mode (rightmost button of the tools bar) for faster calibration: We are using a lot of high resolution images here! -Use the "Improve Angles" tool. Do not use "improve offsets", as all the shots are actually made by the same rotating camera and the lens center offset should not diffe…

    • 0 replies
    • 960 views
  9. A preset for the Insta360 OneX2 camera is now available. To optimize the generic preset for a specific rig unit, apply the preset, and: -Center the two crop circles -Use the "Improve Angles" tool. Thanks to Hugh Hou for the calibration samples. Insta360OneX2.grp

    • 0 replies
    • 1.2k views
  10. A preset for the Teche 360Anywhere camera is now available. To optimize it for a specific rig unit, apply the preset, and: -Center each of the four crop circles. -Use the "Improve Angles" tool. Thanks to Teche for the calibration samples. Teche360Anywhere.grp

    • 0 replies
    • 1.5k views
  11. Hello guys, is there any preset available for Kandao QooCam 8K? Thank you! Peter

  12. Started by geral,

    Hi, Is anyone working with Insta360 Titan and already has a preset you could share for 11k mono and 10k stereo footage? Thanks

  13. Hey everyone, I'm looking for some help on a project. We made a room sized stop motion with the Insta 360 pro (8k). Filling up the room with every shot. But we made a major flawed judgement call, capturing everything in small video's instead of photo's... So now the insta360stitcher moves everything ever so slightly when stitching each video. I there a way to force mistika vr to keep the stitch parameters exactly the same for all the footage? Otherwise things in the room don't line up perfectly and the effect is lost... And can someone help me to obtain the insta360 Pro template? It isn't available in the template forum page anymore. Thanks for any help with this. We…

  14. Started by john.rice,

    Hey all, I was wondering if anyone can help me out twith this Zcam preset. So far no luck with it in the stored presets.

  15. Preset for the PANONO camera is now available. Apply the preset, then use the "Improve Offsets" and "Improve Angles", then activate the Optical Flow toggle. Thanks to Roel van der Baan and Gavin Farrel for providing media samples. Panono.grp

    • 0 replies
    • 1.6k views
  16. Started by Roman Dudek,

    Here are the presets fro Insta360Pro2. Typicaly, use them as a starting point for the "Use Insta360 calibrate" function. Insta360Pro2_3840x1920.grp Insta360Pro2_3840x2880.grp

    • 2 replies
    • 2.6k views
  17. Presets for the new EVO model available, for both VR180-3D and VR360 modes of use. Use "Improve Offsets" and "Improve Angles" on it. Insta360EVO_VR360.grpInsta360EVO_VR180_3D.grp

    • 0 replies
    • 1.5k views
  18. Started by Roman Dudek,

    Use the "Improve offsets" and "Improve Angles" to adjust for a specific camera unit. Thanks to Alexandre Regeffe for the calibration sample! ZCamV1Pro.grp

    • 0 replies
    • 1.4k views
  19. Started by Roman Dudek,

    Thanks to Damián Turkieh and his company Realidad 360 Argentina for the calibration sample! 360Rize_SeaDak.grp

    • 0 replies
    • 1.2k views
  20. I shoot with a Kandao Obsidian R and I shoot in the Kandao log format. Unfortunately there isn't a Kandao log selection in the gamma curve drop down menu. Is there a selection that will work better than others to chose from?

  21. Apply the preset, and apply "Improve Offsets" and "Improve Angle"s on it. Alternatively, center the lens centers manually and apply only the "Improve Angles". PiSoftTech_PilotEra.grp

    • 0 replies
    • 1.1k views
  22. Started by Roman Dudek,

    There is a preset for Insta360 One X. Use "Improve Offsets" and "Improve Angles" after applying it. Thanks to Hugh Hou for providing the calibration shot set. Insta360OneX.grp

  23. Started by christophehitie,

    Hello, I'm new here, I need to stitch some Obsydian R footage that I just received, but it's in 3420x2700, and the's no preset with this ratio. Can somebody help me please ? Thank you ! Christophe

  24. Started by Matt.Stocks,

    Looking for a preset for the Zcam V1 Pro at 29.97 (3680x2428) and 59.94 (2120x1248). The other regular v1 presets get close but they really don't get me there. Tried manually fiddling with it, but that isn't quite getting me there either. Thanks all!

  25. Started by Tomohiro Miyazaki,

    We got Insta 360 Pro 2. Although the new Insta 360 Pro 2 seems to have different recording sizes and so on, is there a preset for Insta 360 Pro 2 on Mistika VR?

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.