We got Insta 360 Pro 2.
Although the new Insta 360 Pro 2 seems to have different recording sizes and so on, is there a preset for Insta 360 Pro 2 on Mistika VR?

Hi t-miyazaki,

The latest version includes a new feature for InstaPro for stitching a shot. If you cannot make it work properly then  can create a new preset if you send a camera test (a frame of each camera is enough) to the Support Portal  http://support.sgo.es/helpdesk/tickets

 

The test must follow the next:

First, try to obtain a suitable scene for the calibration:

- Nothing and nobody close to the camera, at least 3 meters

- A street with buildings and trees, squares, parking lots

- Large halls, like sports venues, with a structured ceiling, with camera in the open

- Public garage with no cars or columns at less than 3 meters

If a calibration shot cannot be obtained, choose the shot most fitting the above

Optional, especially convenient for cameras with little overlap: Ask for a static scene, and two shots, second with the rig rotated half its camera spacing: Means if they are 4 cameras at the horizon at 90 degrees, rotate the rig 45 degrees. This provides an apparent doubling of a number of cameras and produces better lens distortion detection.

Notice that if a camera allows setting the image ratio at different values, like GoPro that can record both 4:3 and 16:9, settings for both resolutions may be needed. Recording a larger image is always better but some customers used 16:9 ratio apparently.  

 

Looking forward to hearing from you in Support,

.ro